# htop vs btop vs Glances vs atop vs top: Which Process Monitor for a Server? (Measured)

Source: https://srvscripts.com/guides/htop-vs-btop-vs-glances-vs-atop/
Updated: 2026-10-11
Publisher: srvScripts (https://srvscripts.com/)

**Short answer:** keep **htop** as the everyday “what is running now” tool. Install **atop** with logging switched on, because it is the only one here that records history, so you can find what caused a load spike after the fact. Use **Glances** when you want a browser dashboard or a JSON API without setting up a monitoring system. **btop** is the nicest to look at and light on CPU, but it adds nothing a server admin cannot get from htop and atop. **top** is always there when nothing can be installed.

We installed all five on the same server, our cPanel lab (AlmaLinux 9.8, 4 cores, 3.8 GB RAM), on 11 October 2026. We ran each one in a 200×50 terminal for 40 seconds and read its memory (RSS) and CPU with `ps` three times.

## Measured on the same server

| Tool (version) | Memory (RSS) | CPU while open | Default refresh |
| --- | --- | --- | --- |
| top (procps-ng 3.3.17) | 4.3 MB | 0.2% | 3 s |
| htop 3.3.0 | 5.1 MB | about 2% | 1.5 s |
| btop 1.4.7 | 6.9 MB | 0.2% | 2 s |
| Glances 3.4.0.5 (Python) | 34 MB | about 5% | 2 s |
| atop 2.7.1 | 228 MB shown, 5 MB its own | 0.5% | 10 s |

CPU is a percentage of one core. atop’s figure looks alarming, but `/proc/PID/status` showed the same 228 MB as `VmLck` and only 5.4 MB as `RssAnon`: atop locks its pages in RAM so it keeps working when memory runs out. None of these tools is heavy enough to matter on a real server, except Glances on very small VPSs.

## What each one can do

|  | top | htop | btop | Glances | atop |
| --- | --- | --- | --- | --- | --- |
| Installed by default | Yes | Often (not always) | No | No | No |
| Mouse, colours, tree view | Basic | Yes | Yes, with graphs | Yes | Text only |
| Filter and kill from the screen | Yes | Yes | Yes | Yes (k kills) | Yes |
| History (what happened earlier) | No | No | No | Only by exporting to a database | Yes, built-in log files |
| Per-process disk I/O | No | Yes (columns, as root) | Yes | Yes | Yes |
| Per-process network | No | No | No | No | Only with the netatop kernel module |
| Web dashboard | No | No | No | Yes (glances -w) | No |
| JSON/REST API | No | No | No | Yes | Parseable text output (-P) |
| Containers (Docker/Podman) | No | Shows processes | Shows processes | Yes, per container | Shows processes |
| GPU | No | No | Yes | Yes | Yes (with atopgpud) |
| Licence | GPL | GPLv2+ | Apache-2.0 | LGPLv3 | GPLv2 |

## Versions you get from the package manager

| Tool | AlmaLinux 9 (EPEL) | Debian 12 | Newest upstream |
| --- | --- | --- | --- |
| htop | 3.3.0 | 3.2.2 | 3.5 (May 2026) |
| btop | 1.4.7 | 1.2.13 | 1.4.x |
| Glances | 3.4.0.5 | 3.3.1 | 4.x (web UI, REST API, MCP server) |
| atop | 2.7.1 | 2.8.1 | 2.x |

We read the AlmaLinux and Debian versions from `dnf repoquery` and `apt-cache policy` on our labs. The distribution packages are older, but they get security updates with the rest of the system. That is usually the better trade on a production server than installing with pip or from a release tarball.

## htop: the everyday tool

htop is fast and small, and every admin knows it. It has filter (F4), tree (F5), per-user view (u), and kill and renice from the screen. `--readonly` lets you give someone a safe look. See [htop explained](/guides/htop-explained-linux-server/) for every column and key.

## atop: the one with history

atop records every process at a set interval in daily files. In our test it named a CPU burner minute by minute after the burner had already finished, which sar’s 10-minute averages could not do. The catch is that on AlmaLinux 9 the logging service is installed disabled, so turn it on: [find past high load with atop and sar](/guides/atop-sar-history-high-load/).

## Glances: a dashboard and API without a monitoring stack

```
glances -w -B 127.0.0.1            # web UI on http://127.0.0.1:61208/ (Glances 3.4)
curl -s http://127.0.0.1:61208/api/3/load
{"min1":0.49,"min5":0.29,"min15":0.16,"cpucore":4}
glances --stdout cpu.total,mem.percent,load.min1 -t 2
```

The web server answered with HTTP 200 and the API returned JSON on our lab. Glances 3.4 uses API version 3; Glances 4 moved to `/api/4`. The web UI has **no login by default**. Bind it to 127.0.0.1 and open it through an SSH tunnel (`ssh -L 61208:127.0.0.1:61208 root@server`), or set a password with `--password`. Never leave port 61208 open to the internet. The web mode needs `python3-bottle`; on our lab EPEL installed it together with Glances.

## btop: good looking, not essential

btop draws graphs for CPU, memory, disks and network in the terminal, supports the mouse and was light on CPU in our test. On a server it overlaps with htop. Choose it if you prefer it, but it is not a reason to install something extra. Over a slow SSH link or a basic console, `btop -t` (tty mode) uses simpler symbols.

## top: when you cannot install anything

```
top -c                 # full command lines
top -o %MEM            # sort by memory
top -u site1           # one user
top -b -n 1 | head -20 # one snapshot as text, for scripts and tickets
```

`top -b -n 1` is useful for pasting into a ticket or saving from cron. Inside top, 1 shows each core, M and P sort by memory and CPU, and k kills.

## What we recommend for a hosting server

- **Every server:** htop, plus atop with logging enabled, plus sysstat (sar), which cPanel servers usually already have.

- **Want a quick browser view of one or two servers:** Glances on 127.0.0.1 behind an SSH tunnel.

- **Several servers, alerts, history graphs:** use a monitoring system instead: [Netdata](https://srvscripts.com/guides/netdata-cpanel-directadmin-install/), Zabbix or a lightweight hub-and-agent tool. That is a separate decision from the process viewer.

- **Disk or network per process:** add `iotop-c` (disk) and `nethogs` (network); none of the five does network per process out of the box.

## Frequently asked questions

### Is btop better than htop?

It looks better and has graphs, and in our test it used slightly more memory (6.9 MB vs 5.1 MB) and less CPU. For server work they do the same job; htop is more common and already installed on many servers.

### Which Linux process monitor keeps history?

atop. Its logging service writes snapshots of every process to /var/log/atop, which you read later with atop -r or atopsar. htop, btop, top and Glances only show the present unless you export Glances data to a database.

### Does Glances have a web interface?

Yes. glances -w starts a web server on port 61208 with a dashboard and a REST API. It has no password by default, so bind it to 127.0.0.1 and use an SSH tunnel, or set --password.

### Why does atop use so much memory?

It locks its pages into RAM so it keeps running under memory pressure. On our lab, ps showed 228 MB but only 5 MB was its own memory.

### Which process monitor uses the least resources?

top and htop, at about 4 to 5 MB of memory in our test. Glances, written in Python, used about 34 MB and the most CPU.